10/100/1000M multi mode to single mode media converter
Introduction
MM to SM Fiber Converter is used to convert multi-mode fiber signal to single mode equivalent that extends the long span fiber connections easily and inexpensively. Gigabit Ethernet supports long wave 10/100/1000 Base-LX/1000Base-LX and short wave 10/100/1000 Base-SX/ 1000Base-SX fiber network. This media converter can be installed as a standalone unit or as a slide-in module to the 19" converter rack (up to 10 units) for use at a central wiring closet.
Technical parameters
1. Standard Protocol: IEEE802.3;IEEE802.3u;IEEE802.3x;IEEE802.3Z/AB;100Base-T/SX/LX 1000Base-T/SX/LX
2. Transfer rate:
Electrical interface: 10/100/1000Mbps
Fiber interface: 1.25Gbps
3 Fiber port: SC, duplex
4. Operation mode: full duplex mode or half duplex mode
5. Power supply: 5V DC 1A, external
6. Environmental temperature: 0℃-60 ℃
7. Relative humidity: 5%-90%
8. fiber type:
multi-mode: 50/125, 62.5/125μm
single mode: 8.3/125,8.7/125,9/125 or 10/125μm
9. Dimensions: 95mm(W)×70mm(D)×26mm(H)
S/N |
Part Number |
Typical Distance |
Wavelength |
1 |
S/M-M10 | 2KM/10KM | 850nm/1310nm |
2 |
S/M-M20 | 2KM/20KM | 850nm/1310nm |
3 |
S/M-M40 | 2KM/40KM | 850nm/1310nm |
4 |
S/M-M60 | 2KM/60KM | 850nm/1550nm |